The 6000kg 2 post lift HeberPro HPX-TG360C (HB-X-PF-6.0C) combines electronic control with an integral overhead gantry for commercial vehicle service bays. Its 3022 mm passing width and 4460 mm columns give distributors and fleet workshops clear dimensions for planning. Furthermore, a clear floor helps teams arrange access beneath a raised vehicle.
6000kg 2 post lift: Core Engineering Advantages
Electronic control for a defined operating position
The C version uses electronic control, as specified for this model. Consequently, buyers can select a control arrangement distinct from the manual A and single-side manual B versions. The illustration shows a column-mounted control box. Before ordering, confirm the button functions, release sequence and supplied electrical configuration in the operating manual.
Integral overhead gantry and clear floor
The overhead gantry connects the columns above the working area. As a result, there is no connecting baseplate across the floor between the posts. Also, the 4460 mm column height helps buyers screen potential workshop locations. Check the contact bar, roof structure and vehicle height when calculating usable clearance.
3.0 kW hydraulic power with adjustable descent
A 3.0 kW motor supports the listed 45-second rising cycle. In addition, the specification gives an adjustable descending time of 40–50 seconds. Buyers can request either the listed 220 V or 380 V supply. Therefore, include the local phase and frequency in your enquiry so HeberPro can confirm the appropriate motor and control package.
Pad height and bay width for vehicle assessment
The lifting-height range is 1880–1945 mm, while minimum pad height is 100–165 mm. These are source specification ranges for one model. In particular, verify the supplied pads and adapters before assigning a vehicle. Also, distinguish the 3022 mm passing width from the 3320 mm column spacing when planning doors, mirrors and technician access.
6000kg 2 post lift: Technical Specifications
Use these dimensions for initial equipment selection and quotation requests. Imperial values are calculated conversions. Furthermore, obtain the installation drawing before finalizing anchors or the workshop slab.
| Parameter | Specification |
|---|---|
| Brand | HeberPro |
| Model | HPX-TG360C |
| Factory Code | HB-X-PF-6.0C |
| Rated Capacity | 6000 kg / 13227.7 lbs |
| Control System | Electronic control |
| Structure | Integral overhead gantry; clear floor |
| Lifting Height | 1880–1945 mm / 74.02–76.57 in |
| Min. Pad Height | 100–165 mm / 3.94–6.50 in |
| Passing Width | 3022 mm / 118.98 in |
| Column Height | 4460 mm / 175.59 in |
| Column Spacing | 3320 mm / 130.71 in |
| Rising Time | 45 seconds |
| Descending Time | 40–50 seconds, adjustable |
| Motor Power | 3.0 kW / approximately 4.02 hp |
| Power Supply | 380 V / 220 V; specify phase and frequency |
| Packing Size (L × W × H) | 4500 × 530 × 860 mm / 177.17 × 20.87 × 33.86 in |
| Calculated Packing Volume | 2.0511 m³ / approximately 72.44 ft³ |
Commercial Workshop Applications and Model Comparison
Equipment wholesalers, dealership service centers, fleet maintenance teams and chassis repair chains can assess this lift for a commercial service bay. For example, enquiries for Ford F-250/F-350, RAM 3500, Mercedes-Benz Sprinter or motorhome fleets should identify the exact vehicle variant and loaded weight. Vehicle names and the illustrated motorhome do not establish universal compatibility.
Likewise, low-clearance cars and electric vehicles require an arm-reach, adapter and lifting-point assessment. Check axle loads, center of gravity and overhead clearance for each application. Then, compare alternatives in HeberPro two-post lifts and truck lifts.
| HeberPro Model | Factory Code | Control Arrangement | Rated Capacity |
|---|---|---|---|
| HPX-TG360A | HB-X-PF-6.0A | Manual control | 6000 kg |
| HPX-TG360B | HB-X-PF-6.0B | Single-side manual unlocking | 6000 kg |
| HPX-TG360C | HB-X-PF-6.0C | Electronic control | 6000 kg |
All three listed integral-gantry versions share 3022 mm passing width and 4460 mm column height in the source specification. However, their control arrangements differ. Review the HPX-TG360B single-side manual alternative, or use the product comparison tool to prepare your shortlist.
Export Packing, Container Planning and OEM Requests
The listed package measures 4500 × 530 × 860 mm, with a calculated volume of 2.0511 m³. Therefore, check the receiving warehouse access and unloading route before booking freight. Request the actual export-frame drawing, gross weight and forklift entry positions. These dimensions alone do not establish crate material or stacking strength.
For initial planning, the same unstacked rectangular layout used for this package size gives approximately four sets in a 20GP or eight in a 40HQ. This is a geometric estimate, subject to the actual container dimensions. Furthermore, handling clearance, payload, lashing and blocking can reduce the quantity. HeberPro must confirm the final loading plan and any proposed stacking.
For OEM enquiries, send your RAL color, logo and nameplate requirements together with the destination market. Also, specify voltage, phase and frequency. The source lists 220 V and 380 V; other supplies require confirmation. Ask for custom-option quantities, costs and sample approval before placing a distributor order.
Frequently Asked Questions
What are the main specifications of this 6000kg 2 post lift?
HeberPro HPX-TG360C (HB-X-PF-6.0C) offers 6000 kg rated capacity, electronic control, 3022 mm passing width and 4460 mm columns. In addition, the source lists a 3.0 kW motor, a 45-second rise and adjustable 40–50-second descent.
What package and container information should I request?
The listed packing size is 4500 × 530 × 860 mm. Therefore, request gross weight, frame photographs, forklift entry details and a written container-loading plan. The four-set 20GP and eight-set 40HQ figures are preliminary single-layer estimates, not guaranteed loading quantities.
What concrete foundation and anchors are required?
Obtain the model-specific foundation drawing and installation manual before preparing concrete. In particular, the installer must verify slab strength, thickness, reinforcement, curing, anchor specifications and edge distances. Use the manual download page and request the exact manual for your supplied configuration.
What warranty and spare parts can be included?
Request written 12-month core-structure and hydraulic warranty terms, including coverage and exclusions. Also, agree a consumable-spares list and any free parts allocation in the quotation. Consult the HeberPro warranty page and obtain the terms that apply to your order.
Can I order one set or request OEM branding?
Request a one-set sample quotation for evaluation. Furthermore, send your color, branding and electrical requirements so HeberPro can confirm availability and the MOQ for each option. For destination compliance, request the model-specific declaration and supporting documents through the certification enquiry page.
What is the indicative equipment price?
The indicative price is USD 2014.68 per set, calculated on 3 November 2026 using the published 2 November reference of 6.6611 CNY per USD. It excludes freight, destination duties and installation. Therefore, obtain a current written quotation covering the configuration, accessories and delivery terms.
Request a Direct Factory Wholesale Quote
To specify your 6000kg 2 post lift, send the vehicle list, workshop drawing, electrical supply, destination and order quantity. Then, request a HeberPro quotation, browse the catalog, or review the buyer FAQ. Include the required installation and conformity documents in your request.
Finally, consult the Automotive Lift Institute guidance on lift safety standards when assessing procurement requirements. This reference does not state that this model holds ALI certification.
