The 6000kg 2 post lift HeberPro HPX-TG360XB (HB-X-PF-6.0XB) combines single-side unlocking with a split overhead gantry for commercial vehicle service bays. Its 3022 mm passing width and 4460 mm columns give distributors clear dimensions for planning. Furthermore, a clear floor helps technicians arrange access beneath a raised vehicle.
6000kg 2 post lift: Core Engineering Advantages
Single-side unlocking for a consistent operating position
The XB version brings the manual unlocking control to one side of the lift. Consequently, technicians can use a single-side release arrangement during the lowering workflow. This differs from the XA manual version and XC electronic control version. Before commissioning, confirm the release linkage and operating sequence with the supplied manual. Also, train operators on the exact configuration delivered.
Split gantry and clear floor
The split gantry uses separate structural sections and connects the columns above the working area. As a result, there is no connecting baseplate across the floor between the posts. Also, the 4460 mm column height helps buyers screen potential workshop locations. Check the overhead bar, roof structure and vehicle height when calculating usable clearance.
3.0 kW hydraulic power with adjustable descent
A 3.0 kW motor supports the listed 45-second rising cycle. In addition, the specification gives an adjustable descending time of 40–50 seconds. Buyers can request either the listed 220 V or 380 V supply. Therefore, include local phase and frequency in your enquiry so HeberPro can confirm the appropriate electrical package.
Pad height and bay width for vehicle assessment
The lifting-height range is 1880–1945 mm, while minimum pad height is 100–165 mm. In particular, verify the supplied pads and adapters before assigning a vehicle. Also, distinguish the 3022 mm passing width from the 3320 mm column spacing when planning doors, mirrors and technician access.
6000kg 2 post lift: Technical Specifications
Use these dimensions for initial equipment selection. Imperial values are approximate conversions. Furthermore, obtain the installation drawing before finalizing anchors or the workshop slab.
| Parameter | Specification |
|---|---|
| Brand and model | HeberPro HPX-TG360XB |
| Factory code | HB-X-PF-6.0XB |
| Rated capacity | 6000 kg / 13227.7 lbs |
| Release and structure | Single-side unlocking; split overhead gantry; clear floor |
| Lifting height | 1880–1945 mm / 74.02–76.57 in |
| Minimum pad height | 100–165 mm / 3.94–6.50 in |
| Passing width | 3022 mm / 118.98 in |
| Column height | 4460 mm / 175.59 in |
| Column spacing | 3320 mm / 130.71 in |
| Rising time | 45 seconds |
| Descending time | 40–50 seconds, adjustable |
| Motor | 3.0 kW / approximately 4.02 hp |
| Supply | 220 V / 380 V; confirm phase and frequency |
| Package count | 1 set / 3 packages |
| Package 1 | 2950 × 530 × 860 mm / 116.14 × 20.87 × 33.86 in |
| Package 2 | 1630 × 430 × 315 mm / 64.17 × 16.93 × 12.40 in |
| Package 3 | 3450 × 335 × 50 mm / 135.83 × 13.19 × 1.97 in |
| Combined rectangular packing volume | Approximately 1.6232 m³ / 57.32 ft³ |
Commercial Workshop Applications and Model Comparison
Equipment wholesalers, dealership service centers, fleet maintenance teams and chassis repair chains can assess this lift for commercial service bays. For example, enquiries for Ford F-250/F-350, RAM 3500 or Mercedes-Benz Sprinter fleets should identify the exact variant and loaded weight. Vehicle names and the illustrated car do not establish universal compatibility.
Likewise, low-clearance cars and electric vehicles require an arm-reach, adapter and lifting-point assessment. Check axle loads, center of gravity and overhead clearance. Then, compare alternatives in HeberPro two-post lifts and truck lifts.
| Model | Factory code | Release system | Capacity |
|---|---|---|---|
| HPX-TG360XA | HB-X-PF-6.0XA | Manual | 6000 kg |
| HPX-TG360XB | HB-X-PF-6.0XB | Single-side unlocking | 6000 kg |
| HPX-TG360XC | HB-X-PF-6.0XC | Electronic control | 6000 kg |
All three split-gantry versions list 3022 mm passing width and 4460 mm columns. However, release arrangements differ. For a manual split-gantry alternative, review the HPX-TG360XA manual model. For an integral alternative, compare the HPX-TG360C electronic model. Also, use the comparison tool to prepare a shortlist.
Export Packing, Container Planning and OEM Requests
One set ships in three packages: 2950 × 530 × 860 mm, 1630 × 430 × 315 mm and 3450 × 335 × 50 mm. Their combined rectangular volume is approximately 1.6232 m³. Therefore, plan receiving space for all three pieces and label them as one complete lift set. Request actual export-frame photographs, gross weight and forklift entry details before booking freight.
Compared with the integral model’s 4500 mm main package, the longest listed piece is 3450 mm. As a result, buyers can assess a different handling footprint for warehouse access. Nevertheless, package dimensions do not establish stacking strength or a guaranteed container quantity. Request a 20GP or 40HQ loading plan covering all pieces, payload, blocking and lashing.
For OEM enquiries, send your RAL color, logo and nameplate requirements with the destination market. Also, specify voltage, phase and frequency. The source lists 220 V and 380 V; other supplies require confirmation. Ask for custom-option quantities, costs and sample approval before placing a distributor order.
Frequently Asked Questions
What are the main specifications of this 6000kg 2 post lift?
HeberPro HPX-TG360XB (HB-X-PF-6.0XB) offers 6000 kg rated capacity, single-side unlocking, 3022 mm passing width and 4460 mm columns. In addition, it lists a 3.0 kW motor, a 45-second rise and adjustable 40–50-second descent.
What package and container information should I request?
Each set has three packages: 2950 × 530 × 860 mm, 1630 × 430 × 315 mm and 3450 × 335 × 50 mm. Therefore, request gross weights, export-frame details and a confirmed container plan. The calculated combined volume is approximately 1.6232 m³.
What concrete foundation and anchors are required?
Obtain the model-specific foundation drawing before preparing concrete. In particular, the installer must verify slab strength, thickness, reinforcement, curing, anchor specifications and edge distances. Use the manual download page and request the exact manual for your supplied configuration.
What warranty and spare parts can be included?
Request written 12-month core-structure and hydraulic warranty terms, including coverage and exclusions. Also, agree a consumable-spares list and any free parts allocation in the quotation. Consult the HeberPro warranty page and obtain the terms that apply to your order.
Can I order one set or request OEM branding?
Request a one-set sample quotation for evaluation. Furthermore, send your branding and electrical requirements so HeberPro can confirm availability and MOQ for each option. For destination compliance, request model-specific declarations and documents through the certification enquiry page.
What is the indicative equipment price?
The indicative price is USD 1995.97 per set, calculated on 5 November 2026 using a reference rate of 6.668425 CNY per USD. It excludes freight, destination duties and installation. Therefore, obtain a current quotation covering configuration, accessories and delivery terms.
Request a Direct Factory Wholesale Quote
To specify your 6000kg 2 post lift, send the vehicle list, workshop drawing, electrical supply, destination and quantity. Then, request a HeberPro quotation, browse the catalog, or review the buyer FAQ. Include the required installation and conformity documents in your request.
Finally, consult the Automotive Lift Institute guidance on lift safety standards when assessing procurement requirements. This reference does not state that this model holds ALI certification.
