Altertool

Double column, hydraulic lifter can not be lowered for what reasons, how to exclude the return port strainer blockage, remove and clean. Solenoid valve spool network clogging, remove and clean. The speed control valve spool has impurities stuck, remove and clean. Mechanical insurance is not open or there is a mechanical obstacle stuck below the movement, check […]

In the above process, the machine should be no abnormal noise and other abnormal phenomena. 1. Lifting machine load operation 2. After driving the car on the working platform, pull the brake handbrake tightly and the driver withdraws from the working platform. 3. The anti-skid support will be reliably padded in the front and rear of

Two-post lifter The type of lift is characterized by good synchronization, but due to mechanical lift mechanical wear and tear maintenance costs are high (often need to replace nuts and bearings), the annual cost of a lift maintenance and replacement costs need about 1000 yuan, the customer will eventually replace the product for the low maintenance

The working principle of the car lifter: the main component of the car lifter is the hydraulic system. Relying on the hydraulic system pressurized lifting, motor driven hydraulic pump, hydraulic pressure to promote the hydraulic cylinder plunger, drive the chain, lifting the car bracket, lift the car. Decompression landing, pull the slide two mechanical safety lock, press

Tire side and inner edge breakage Tire side breakage: Some car owners have a poor sense of location and often let the side of the tire rub against the road edge when parking, which will wear the side of the tire over time. Tire inside edge of the breakage: tire inside edge of the breakage, mostly due

At present, there are many brands and types of lifters on the market, providing users with many choices. So what factors should we consider when buying a lift? (A) safety is the first element Lifting machine is lifting equipment, involving the safety of the vehicle and the operator. So in the procurement of lift, should be its security as

If the lift machine sound abnormal: 1. may be lifting overload solution: check the lifting weight 2. may be the motor fixed bolt loose solution: tighten the bolt 3. may be the slider at the lack of lubricant solution refill lubricant.   Occasionally, the hydraulic lift may fail in the daily work of the hydraulic system and and

Lifter as a comprehensive multi-technology products, its impact on the performance of the lift many factors, the main factors are the design of the lift, manufacturing process, insurance devices, synchronization devices, etc. Manufacturing process At present, many manufacturers in the design of the lifter mainly use the empirical analogy method, the different lifting tonnage of the lifter in accordance with

Drive type From the type of drive to classify the lifter, at present mainly divided into pneumatic, hydraulic, mechanical three categories. In particular, the majority of liquid, mechanical, pneumatic least, the following is a brief introduction to the advantages and disadvantages of hydraulic and mechanical lifts. Mechanical lift mainly has a single motor driven thread drive lift

C. four-post lift Four-post car lifter is a large tonnage car or truck repair and maintenance units commonly used special machinery lifting equipment, four-post car lifter is also very suitable for four-wheel positioning with, because the general four-post car lifter have a four-wheel positioning gear, can be adjusted to ensure the level. Four-post lift according to