The Altertool HB-X-PF-6.0A (HeberPro Model: HPX-TG360A) is an industrial-grade 6000kg 2 post lift featuring a reinforced manual integral gantry overhead beam, a high-torque 3.0kW electro-hydraulic power pack, and an extra-wide 3,022mm drive-through clearance. Built specifically for commercial truck repair centers, fleet maintenance facilities, and dealership service bays, this heavy-duty 6.0-ton clear-floor vehicle hoist delivers unmatched structural stability when lifting heavy pickup trucks, cargo vans, and light commercial vehicles.

Whether you are upgrading a municipal fleet workshop or sourcing high-tonnage garage equipment for international distribution, you can explore our full range of Two Post Car Lifts to find factory-direct lifting solutions tailored to your market.

Key Features of the HB-X-PF-6.0A 6000kg 2 Post Lift

1. Reinforced 4460mm Manual Integral Gantry & Clear-Floor Design

Unlike standard passenger car hoists, this 6000kg 2 post lift utilizes a heavy-gauge one-piece integral gantry column standing 4,460mm tall. Running the hydraulic hoses and equalization steel cables through the top overhead crossbar creates an obstruction-free floor workspace, allowing technicians to roll transmission jacks, oil drains, and heavy tool carts effortlessly beneath the raised vehicle. An integrated overhead padded safety shut-off bar immediately stops upward travel if a high-roof van contacts the limit bar.

2. Extra-Wide 3022mm Passing Width for Commercial Trucks & Vans

Standard two-post lifts often struggle with wide commercial chassis. The Altertool HB-X-PF-6.0A features an expanded 3,320mm column spacing and an impressive 3,022mm (119-inch) passing width. Combined with heavy-duty multi-stage telescopic support arms, a 100–165mm minimum pad height, and a 1,880–1,945mm maximum lifting height, this 6000kg 2 post lift accommodates everything from standard SUVs to wide-track commercial pickups and long-wheelbase delivery vans.

3. Upgraded 3.0kW Hydraulic Power System & Manual Safety Lock Release

To handle a full 6,000kg (13,200 lbs) payload smoothly, the lift is powered by an upgraded 3.0kW heavy-duty motor (available in 380V 3-Phase or 220V configurations), achieving full lifting height in just 45 seconds. The reliable manual mechanical safety lock release system engages automatically as the carriages rise and eliminates complex electronic boards—minimizing maintenance downtime in harsh workshop environments. An adjustable lowering valve (40s–50s descending speed) ensures controlled, safe descent under heavy loads. All structural and hydraulic components are manufactured in strict accordance with ISO 9001 quality management standards and European CE Machinery Directive 2006/42/EC safety guidelines.

Technical Specifications – HB-X-PF-6.0A (HPX-TG360A) 6000kg 2 Post Lift

Workshop Bay & Concrete Foundation Requirements

• Concrete Thickness & Strength: Because this 6000kg 2 post lift handles up to 6 tons, a reinforced concrete slab with a minimum thickness of 200mm–250mm (8″–10″) and a minimum compressive strength of 3,000 PSI (C25/C30 grade), cured for at least 28 days, is required.

• Ceiling Height Requirement: Minimum workshop ceiling height of 4,600mm (15.1 ft) is recommended to accommodate the 4,460mm one-piece integral gantry columns comfortably.

• Power Supply: Dedicated 380V 3-phase or 220V circuit breaker (minimum 20A–25A) for the 3.0kW motor, plus 12–15 liters of AW-32 or AW-46 anti-wear hydraulic oil.

Shipping, Packaging & Factory Warranty

• Heavy-Duty Export Steel Frame Packaging: Each unit is packed in a reinforced steel frame measuring 4,500 × 530 × 860 mm to prevent column distortion and protect powder-coated surfaces during ocean freight and forklift handling.

• Container Loading Optimization: Due to the 4,500mm integral column package length, we recommend shipping via 40ft High Cube (40HQ) containers, which can load approximately 24 to 28 sets per container. Mixed container loading with tire changers, wheel balancers, and Hydraulic Jacks is fully supported.

• Warranty & OEM Customization: Backed by a 2-year structural warranty and 1-year hydraulic/electrical component warranty, with free replacement seals included for bulk orders. Custom RAL colors (Red, Blue, Black, Dark Grey) and private-label OEM branding are available. Please Contact Our Engineering & Wholesale Team for FOB/CIF quotes and distributor pricing.

Frequently Asked Questions (FAQ)

Q1: Why choose the HB-X-PF-6.0A 6000kg 2 post lift over a standard 4-ton lift? A1: A standard 4-ton lift has a narrower passing width (~2,500–2,620mm) and a 2.2kW motor. The HB-X-PF-6.0A 6000kg 2 post lift provides a true 6.0-ton capacity, an extra-wide 3,022mm passing width, a taller 4,460mm integral column, and a 3.0kW motor—making it essential for heavy commercial vans, dually pickups, and armored or long-wheelbase vehicles.

Q2: Can the 4,500mm package fit into a 20ft container? A2: Yes, a 20ft GP container has an internal length of approximately 5,898mm, so the 4,500 × 530 × 860 mm package fits inside a 20GP (~10–12 sets). However, a 40HQ container (12,032mm internal length) offers the best sea freight cost efficiency per unit (~24–28 sets).

Q3: What is the difference between manual unlocking and electronic unlocking on a 6-ton lift? A3: Manual mechanical unlocking uses heavy-duty mechanical release levers without relying on 24V electromagnetic solenoids or circuit boards. Fleet workshops and heavy truck repair centers often prefer manual unlocking for 6-ton lifts due to its rugged simplicity, zero electrical lock failure rate, and easy maintenance.